1000 Watt Metal Halide Ballast Kits
1000 Watt Probe Start Metal Halide Ballast Replacement Kit
Multi-Tap 120V 208V 240V 277V 480V
1000W Metal Halide Ballast Kit Details:
Ballast Operating Voltage: 120V/208V/240V/277V/480V 60Hz (5-Tap)
Ballast Amp Draw: 120V=9.00 208V=5.00 240V=4.55 277V=3.95
Ballast ANSI: M47 (probe start metal halide)
Ballast Wattage: 1000 Watt
Ballast Type: HID Magnetic Metal Halide
Ballast Power Factor: 0.98
Ballast Circuit Type: CWA
Ballast Shipping Weight: 19 lbs
JAMES Warranty: 3 Years
Capacitor Included: 24.0/480
Mounting Hardware Included.
Additional Metal Halide Ballast Info:
1000 Watt metal halide ballast M47 replacement kit w/ capacitor, core & mounting hardware. We recommend all ballast servicing be done by a certified electrician. Improper wiring is unsafe and can damage the lamp and/or ballast kit.
1000W Ballast Cross Reference
James Ballast: 1000W-MH-81C-212-K
Cross Reference may not be exact, please check details before ordering.
Ballast ANSI: M47
Operating Voltage: 120V, 208V, 240V or 277V
Included: Capacitor, Core, Mounting
1000 Watt Metal Halide Ballast Kit.
FAQ:
What is the voltage rating for a 1000W MH ballast?
Answer: The voltage rating for a 1000W MH ballast typically ranges from 120V to 480V.
Can a 1000W MH ballast be used with a 400W MH lamp?
Answer: No, a 1000W MH ballast is designed to work with 1000W MH lamps only.
How long does a 1000W MH ballast last?
Answer: A 1000W MH ballast can last for many years, but its lifespan depends on various factors such as usage, environment, and maintenance.
What are the dimensions of a 1000W MH ballast?
Answer: The dimensions of a 1000W MH ballast can vary depending on the manufacturer and model. However, most are around 16-18 inches long, 5-6 inches wide, and 4-5 inches tall.
What is the warranty on a 1000W MH ballast?
Answer: The warranty on a 1000W MH ballast can vary depending on the manufacturer and model, but it typically ranges from 2 to 5 years.
How do I wire a 1000W MH ballast?
Answer: Wiring a 1000W MH ballast can be a complex process and should be done by a qualified electrician. The wiring instructions can be found in the manufacturer’s installation manual.
Can a 1000W MH ballast be used in a damp location?