Can’t exactly the same ballast drive the metal halide lamp and sodium lamp?

High-pressure sodium lamp and metal halide lamp, even though will be the higher power fuel discharge lamp, but on account of the various substances, the luminous efficiency is additionally diverse, from the design of light source, the exact same power substantial stress sodium lamp and metal halide lamp, the style from the latest and voltage is unique. As a result, light ballast for metal halide lamp and higher pressure sodium lamp should not be mixed. Some consumers combine metal halide lamp and large pressure sodium lamp ballast, although it can be lit, but will probably be shortened the existence of the bulb or on account of the above higher temperature of your ballast and damage to electrical appliances. James lighting provides the light ballast for metal halide lamp and large pressure sodium lamp. Consumer can opt for matching appliances (as by hid do light source due to the high efficiency, high existence, substantial irradiation angle and is broadly used in outdoor lighting. On the other hand, due to the present technological innovation is not really completely mature, especially in the light of metal halide lamp light source. Because of the current domestic within this business, a blind, frequently the lamps from the IP degree layout is extremely higher, so invisible will improve the problems of layout and layout charges. In actual fact, so long as the water just isn’t utilised for that water as well as the bottom of your outdoor lighting lamps as long as the IPX3~IPX5 might be created, and in accordance with the real use of the occasion may also be put in inside the lowest aspect in the installation of drainage holes. And this is often additional beneficial to your electrical heat.

two. The light source as well as electrical matching: on account of the present market place of HID light source varies tremendously, especially domestic production of large electrical power metal halide lamp. The truth is, the current domestic manufacturing line from the metal halide lamp essentially is employed American Typical manufacturing line, but additionally made use of to the production of European common metal halide lamp. Due to the strictly in accordance together with the European typical American regular parameters to differentiate the production is used to match the electrical elements (lamp ballast,ignitor). The European common along with the manufacturing cost is low American Standard ballast. This can result in market place there’s a lot of ballast for European common to match American Normal lighting light source. Resulting from the European regular American Regular photoelectric parameters are not the same, will inevitably lead to the light source, electrical life decreased .

three. Outdoor lighting in architectural lighting applications should really pay focus to your dilemma: the pan lighting the way to light up creating facade is creation and beautify the urban landscape of the significant one particular. This way can not only illuminate the facade of the building. By the careful layout of the lighting designer, but in addition to make a far more seductive than the day with the moving result, the degree of clear, emphasizing and highlighting the building’s persona. But pan lighting is just one on the lighting from the developing, is never ever the only, under no circumstances mention facade lighting is none apart from the floodlighting, facade lighting is not equal on the floodlights fixture.

The creating of the broad light lighting really should possess the following two two conditions:
Initially: the surface of a creating shall have a particular reflection ratio. The illumination is to see the brightness from the surface from the path of observation, by the light from the light as well as the light shines to the surface on the constructing. 2nd: the reflection of the surface on the constructing is finest reflected, no less than, it need to be a diffuse reflection. All sorts of surface to possess a particular reflection of light. And as outlined by distinctive surface degree of finish, reflective conditions may also be distinctive roughly right for directional reflection, diffusion and diffuse reflection 3 creating a, hotels, residential, hospital wards, and so on. it’s greatest not to use floodlight lighting the way in which, since this kind of constructing during the evening will probably be somebody at perform or rest B, pan lighting applications, the position on the light towards the suitable, set light for the light left is to confront the distance isn’t too far, not too near.

Request A Quote

Related Products:

Get an instant quote from our most experienced consultants