35w – 2000w HID electronic Ballasts for MH, HPS bulbs

Certificates and Standards:
*CE No.:08120164
* Harmonic distortion EN 61000-3-2
* EMC EN 61547/ EN 55015/ EN 55022B
* Safety EN 60926/ EN 60928 / VDE 0712/14, 22
* Performance EN 60927/EN 60929
* Libration and impact IEC 68-2-6-FC/IEC 68-229-Eb
* Quality standard ISO 9001
* Environmental standard ISO 14001
* Authentication of China energy saving products.


An HID (High-Intensity Discharge) electronic ballast is a type of ballast used in HID lighting systems that utilizes electronic components to regulate the electrical current that is sent to the lamp.

Unlike magnetic ballasts that use a transformer and a coil to regulate the current, electronic ballasts use a solid-state circuit to provide a more precise and efficient method of controlling the lamp’s operation.

Electronic ballasts can operate at a higher frequency than magnetic ballasts, which helps to reduce the lamp’s flicker and provides a more stable light output. They also have a smaller form factor and produce less heat than magnetic ballasts, which can be beneficial in applications where space is limited.

Electronic ballasts are available for various types of HID lamps, including metal halide, high-pressure sodium, and mercury vapor lamps. They are commonly used in indoor and outdoor lighting applications, including sports stadiums, streetlights, parking lots, and commercial and industrial facilities.

Generally speaking, electronic ballasts provide a reliable and efficient solution for regulating the power supplied to HID lamps, which helps to maximize their performance and lifespan.


HID electronic ballasts are available in a range of wattage ratings, depending on the specific application and type of lamp being used.

Some of the most popular wattage ratings for HID electronic ballasts include:

50 watts
70 watts
100 watts
150 watts
175 watts
250 watts
400 watts
600 watts
1000 watts
The wattage rating of the electronic ballast must match the wattage rating of the lamp being used. For example, a 400-watt metal halide lamp requires a 400-watt electronic ballast.


70w –1500w MH HPS MV electronic Ballasts for HID bulbs wholesale


Technical Description:
. Professional patented control software, simple circuit and stable performance
·Wide range of operation voltage, suitable for large voltage fluctuation circumstances
·A little current to start, expansion of lamps life and reduction of original installation charge
·Low voltage to start, suitable for low voltage circumstances
·High efficiency >94%, remarkable effect of saving energy
·High power factor, able to reduce initial installation cost
·Able to ensure the invariableness of out power even if input power fluctuates
·Long line driven (The ballast can be installed far from lamp and is easy to maintain.)
·High quality of illumination, no frequent flash
·Low total harmonic distortion, little impact on power network
·Full protection: protection for open loop, short loop and hot lamp restart
·Low temperature rise, applicable to wind range of environmental temperature
·Light body
·Easy installation, without outside starter, no compensation capacitor.

What’s the advantage of HID electronic Ballasts:

HID (High-Intensity Discharge) electronic ballasts offer several advantages over traditional magnetic ballasts used in HID lighting systems.

  1. Energy Efficiency: Electronic ballasts are more energy-efficient than magnetic ballasts. They can operate at a higher frequency, which reduces the power loss in the ballast and increases the overall efficiency of the lighting system.
  2. Improved Light Quality: Electronic ballasts provide a more stable and consistent current to the lamp, which results in a more stable and flicker-free light output. This helps to improve the quality of the light and reduce eye strain.
  3. Longer Lamp Life: Electronic ballasts can extend the lifespan of the HID lamp. They provide a more precise and consistent level of power to the lamp, which reduces wear and tear on the lamp and extends its lifespan.
  4. Reduced Maintenance: HID electronic ballasts require less maintenance than magnetic ballasts. They are smaller in size, produce less heat, and have fewer moving parts, which reduces the likelihood of failure and the need for repairs.
  5. Dimming Capability: Electronic ballasts can be dimmed, which allows for greater control over the lighting system. This is beneficial in applications where variable lighting levels are required, such as in theaters, museums, and other commercial and industrial settings.


Lead Time: 20 days after received 30% deposit
Payment: T/T, L/C at sight, Western Union
Free samples for one to three pieces, Freight on customers’ side
LCL by express, e.g.: FEDEX, DHL, UPS, TNT, etc.
FCL or LCL by ship

Ask For A Quick Quote!

Get an instant quote from our most experienced consultants